SPARK-656, spreader tests:
This commit is contained in:
1 parent
381e277eb9
commit
c3cb14a351
9 files changed
+149
No files matched your search
@@ -0,0 +1,17 @@
|
||||
This is not a test, but common setup instructions that will be used for a few tests
|
||||
|
||||
0. This needs sim with replay turned off, so we can create our own markets.
|
||||
|
||||
1. Create a 2 legged spread in silver :
|
||||
a. Buy SIN1 sell SIZ1
|
||||
b. Price Ratio’s of 1.0 and -1.0 as well
|
||||
c. Quote second leg only
|
||||
d. Hedge Ratio 1 for both legs
|
||||
e. Disable all Quote, Pre-Hedge, Post-Hedge Parameters for both legs
|
||||
|
||||
2. Make sure there is no market for these contracts. If there is, cancel those orders.
|
||||
|
||||
3. For the first leg (non quoting) enter 1 lot bid orders from 18.230 to 18.250 at 0.05 intervals, and 1 lot ask orders from 18.300 to 18.320.
|
||||
Make sure these are reflected in the ladder market data (when the ladder has no market, we will need to enter the first order via an Order Ticket)
|
||||
|
||||
4. For the second leg (quoting leg) enter a 5 lot bid order at 18.5 and a 5 lot sell order at 18.525. Make sure both the markets show up.
|
||||
@@ -0,0 +1,17 @@
|
||||
This is not a test, but common setup instructions that will be used for a few tests
|
||||
|
||||
0. This needs sim with replay turned off, so we can create our own markets.
|
||||
|
||||
1. Create a 2 legged spread in silver :
|
||||
a. Buy SIN1 sell SIZ1
|
||||
b. Price Ratio’s of 1.0 and -1.0 as well
|
||||
c. Quote second leg only
|
||||
d. Hedge Ratio 1 for both legs
|
||||
e. Disable all Quote, Pre-Hedge, Post-Hedge Parameters for both legs
|
||||
|
||||
2. Make sure there is no market for these contracts. If there is, cancel those orders.
|
||||
|
||||
3. For the first leg (non quoting) enter a 5 lot bid at 18.25 and 5 lot ask at 18.30. Make sure these are reflected in the ladder market data.
|
||||
|
||||
4. For the second leg (quoting leg) enter a 5 lot bid order at 18.5 and a 5 lot ask order at 18.525. Make sure both the markets show up.
|
||||
|
||||
@@ -0,0 +1,23 @@
|
||||
This test assumes the user has done the test in simple_sanity.txt
|
||||
|
||||
0. Follow the instructions in common_setup_1.txt
|
||||
|
||||
1. Enter a synthetic order of 1 lot at -0.30. Verify that a quoting order of 18.60 shows up in the second leg.
|
||||
Cancel the synthetic order and the quoting order should be cancelled too.
|
||||
|
||||
2. Change the hedge ratio of the hedging leg to 2.0. Enter a synthetic order of 1 lot at -0.30.
|
||||
Verify that a quoting order of 18.605 shows up in the second leg. Cancel the synthetic order
|
||||
and the quoting should be cancelled too.
|
||||
|
||||
3. Repeat it for a hedge ratio of 5.0, and verify that the quoting order shows at the right price
|
||||
(calculation of this price is left as an exercise for the user). Cancel the synthetic order.
|
||||
|
||||
4. Make the hedging ratio 6.0 and enter a synthetic order of 1 lot at -0.30. You should see an
|
||||
active spreader order, but since there is not enough qty in the hedging market,
|
||||
no quoting order should be sent. Keep this synthetic order running.
|
||||
|
||||
5. Change hedging leg’s 1 lot ask @ 18.30 to a 2 lot. This should enable the hedging qty requirements
|
||||
to be met, and a quoting order should be sent at 18.620. Keep this synthetic order running.
|
||||
|
||||
6. Changing the 2 lot @ 18.30 back to 1, and once again the hedging qty requirements are not met hence
|
||||
the quoter order should be cancelled. Cancel the synthetic order.
|
||||
@@ -0,0 +1,16 @@
|
||||
This test assumes the user has done the test in simple_sanity.txt
|
||||
|
||||
0. Follow the instructions in common_setup_2.txt
|
||||
|
||||
1. Now we are going to force a legged hedge, ie a hedge that does not get filled.
|
||||
The way to do this is to drag the quoting order to force a cross, which will in turn send a hedge
|
||||
that joins the market instead of crossing it. So drag the quoting order all the way to the bid side
|
||||
to cross it with 5 @ 18.50. This should cause a fill in the quoting leg at 18.50 and a hedge order
|
||||
will be sent at 18.20. Verify this. This hedge order will keep working there (since we don't have
|
||||
any post hedging rules right now). Now cancel the spreader order.
|
||||
|
||||
2. Enable the Post-Hedge Ticks Away Cross for the hedging leg. Put 25 for Ticks and 3 for the Cross Ticks. Repeat 4.
|
||||
Now move the opposite inside market of the hedger (which is the ask order at 18.30) gradually away from the
|
||||
hedging order to finally being 26 ticks away. The spreader moves the hedger order 3 ticks into the opposite
|
||||
inside market and cause a fill. The spreader order will be filled too. Verify that the order was indeed sent
|
||||
3 ticks into the opposite inside market
|
||||
@@ -0,0 +1,16 @@
|
||||
This test assumes the user has done the test in simple_sanity.txt
|
||||
|
||||
0. Follow the instructions in common_setup_2.txt
|
||||
|
||||
1. Now we are going to force a legged hedge, ie a hedge that does not get filled.
|
||||
The way to do this is to drag the quoting order to force a cross, which will in turn send a hedge
|
||||
that joins the market instead of crossing it. So drag the quoting order all the way to the bid side
|
||||
to cross it with 5 @ 18.50. This should cause a fill in the quoting leg at 18.50 and a hedge order
|
||||
will be sent at 18.20. Verify this. This hedge order will keep working there (since we don't have
|
||||
any post hedging rules right now). Now cancel the spreader order.
|
||||
|
||||
2. Enable the Post-Hedge Time Away Cross for the hedging leg. Put 10,000 for Time(ms)
|
||||
and 5 for the Cross Ticks. Repeat 4 and wait 10 seconds. This time the hedge order should
|
||||
not wait forever, but after 10 seconds, it should cross the opposite inside market by 5 ticks.
|
||||
The spreader order will be filled too. Verify that the order was indeed sent 5 ticks into
|
||||
the opposite inside market
|
||||
@@ -0,0 +1,15 @@
|
||||
This test assumes the user has done the test in simple_sanity.txt
|
||||
|
||||
0. Follow the instructions in common_setup_2.txt
|
||||
|
||||
1. Send a buy order at -0.20. Since we are crossing the synthetic market’s bid-offer spread,
|
||||
the order should get filled immediately. Verify that and that the quote and hedge prices are correct.
|
||||
|
||||
2. We will now test for Pay Less. This means the hedger order will be entered at an
|
||||
advantageous price (ie buy lower, sell higher) if the quantity at the hedge price level is greater
|
||||
than a threshold. In order to do this we will enable Pay Less for the hedging leg, enter a threshold of 1,
|
||||
select the drop down to Size (ie absolute size vs a ratio) and set Payless ticks to be 15 ticks.
|
||||
|
||||
3. Send a buy order at -0.20. Verify that the hedger order is sent 15 ticks away from the hedging price
|
||||
(since it is a buy order, it should be 15 ticks lower than the hedging price level).
|
||||
This will result in the hedging order being worked on the bid side. Cancel the spreader order.
|
||||
@@ -0,0 +1,14 @@
|
||||
This test assumes the user has done the test in simple_sanity.txt
|
||||
|
||||
0. Follow the instructions in common_setup_2.txt
|
||||
|
||||
1. Send a buy order at -0.20. Since we are crossing the synthetic market’s bid-offer spread,
|
||||
the order should get filled immediately. Verify that and that the quote and hedge prices are correct.
|
||||
|
||||
2. We will now test for Pay Up. This means the hedger order will be entered at a
|
||||
worse price (ie buy higher, sell lower) if the quantity at the hedge price level is less than a threshold.
|
||||
In order to do this we will enable Pay Up for the hedging leg, enter a threshold of 100, select
|
||||
the drop down to Size (ie absolute size vs a ratio) and set Payup ticks to be 5 ticks.
|
||||
|
||||
3. Send a buy order at -0.20. Verify that the hedger order is sent 5 ticks away from the hedging price
|
||||
(since it is a buy order, it should be 5 ticks higher than the hedging price level). Cancel the spreader order.
|
||||
@@ -0,0 +1,18 @@
|
||||
This test assumes the user has done the test in simple_sanity.txt
|
||||
|
||||
0. Follow the instructions in common_setup_2.txt
|
||||
|
||||
|
||||
1. Enter a 1 lot spreader buy at -0.30. Verify the quoting order shows up at the right price.
|
||||
|
||||
2. The quoting order is using the hedging leg’s sell side to price (ie the 5 lot order at 18.30, lets call it S1).
|
||||
So moving S1 should move the quoting order. Since the throttles are turned off, everytime we move S1, the quoting
|
||||
order should move too. Move S1 a few times and verify that the quoting order moves to the correct price.
|
||||
Cancel this synthetic order
|
||||
|
||||
3. Modify the synthetics throttle behaviour. For the quoting leg, enable the Throttle and set Inside Ticks to 1
|
||||
and Outside Ticks to 3. What this means is that quoting orders moving toward the inside markets, have to move
|
||||
beyond 1 tick for them to be sent out; and quoting orders moving away from the inside market have to move beyond
|
||||
3 ticks for them to be sent out. Verify this behaviour by making suitable modifications to S1.
|
||||
|
||||
4. Make adjustments to the spreader price (ie move it from -0.30) and verify the throttling behaviour is correct.
|
||||
@@ -0,0 +1,13 @@
|
||||
This test makes sure the basic spreader functionality works for 2 legged synthetic spreads with one quoting leg
|
||||
|
||||
0. Follow the instructions from common_setup_1.txt
|
||||
|
||||
1. Enter a synthetic order of 1 lot at -0.30. Verify that a quoting order of 18.60 shows up in the second leg.
|
||||
Cancel the synthetic order and the quoting order should be cancelled too.
|
||||
|
||||
2. Enter a synthetic order of 1 lot at -0.30, again. Now drag the the synthetic order down the ladder
|
||||
(ie lower bid prices) to a few random prices of your choice. Verify that the quoter leg price is adjusted
|
||||
accordingly and is correct.
|
||||
|
||||
3. Now cross the synthetic order by dragging it all the way to -0.20 (there should be a 1 lot at that price).
|
||||
Verify that the synthetic order gets filled at -0.20, the quoter order at 18.50, and the hedger order at 18.30.
|
||||
Reference in new issue
Block a user