diff --git a/testing/manual/spreader/common_setup_1.txt b/testing/manual/spreader/common_setup_1.txt new file mode 100644 index 000000000..1121cfa03 --- /dev/null +++ b/testing/manual/spreader/common_setup_1.txt @@ -0,0 +1,17 @@ +This is not a test, but common setup instructions that will be used for a few tests + +0. This needs sim with replay turned off, so we can create our own markets. + +1. Create a 2 legged spread in silver : +a. Buy SIN1 sell SIZ1 +b. Price Ratio’s of 1.0 and -1.0 as well +c. Quote second leg only +d. Hedge Ratio 1 for both legs +e. Disable all Quote, Pre-Hedge, Post-Hedge Parameters for both legs + +2. Make sure there is no market for these contracts. If there is, cancel those orders. + +3. For the first leg (non quoting) enter 1 lot bid orders from 18.230 to 18.250 at 0.05 intervals, and 1 lot ask orders from 18.300 to 18.320. +Make sure these are reflected in the ladder market data (when the ladder has no market, we will need to enter the first order via an Order Ticket) + +4. For the second leg (quoting leg) enter a 5 lot bid order at 18.5 and a 5 lot sell order at 18.525. Make sure both the markets show up. diff --git a/testing/manual/spreader/common_setup_2.txt b/testing/manual/spreader/common_setup_2.txt new file mode 100644 index 000000000..9faa8f8cc --- /dev/null +++ b/testing/manual/spreader/common_setup_2.txt @@ -0,0 +1,17 @@ +This is not a test, but common setup instructions that will be used for a few tests + +0. This needs sim with replay turned off, so we can create our own markets. + +1. Create a 2 legged spread in silver : +a. Buy SIN1 sell SIZ1 +b. Price Ratio’s of 1.0 and -1.0 as well +c. Quote second leg only +d. Hedge Ratio 1 for both legs +e. Disable all Quote, Pre-Hedge, Post-Hedge Parameters for both legs + +2. Make sure there is no market for these contracts. If there is, cancel those orders. + +3. For the first leg (non quoting) enter a 5 lot bid at 18.25 and 5 lot ask at 18.30. Make sure these are reflected in the ladder market data. + +4. For the second leg (quoting leg) enter a 5 lot bid order at 18.5 and a 5 lot ask order at 18.525. Make sure both the markets show up. + diff --git a/testing/manual/spreader/hedge_ratio.txt b/testing/manual/spreader/hedge_ratio.txt new file mode 100644 index 000000000..87d9c0274 --- /dev/null +++ b/testing/manual/spreader/hedge_ratio.txt @@ -0,0 +1,23 @@ +This test assumes the user has done the test in simple_sanity.txt + +0. Follow the instructions in common_setup_1.txt + +1. Enter a synthetic order of 1 lot at -0.30. Verify that a quoting order of 18.60 shows up in the second leg. +Cancel the synthetic order and the quoting order should be cancelled too. + +2. Change the hedge ratio of the hedging leg to 2.0. Enter a synthetic order of 1 lot at -0.30. +Verify that a quoting order of 18.605 shows up in the second leg. Cancel the synthetic order +and the quoting should be cancelled too. + +3. Repeat it for a hedge ratio of 5.0, and verify that the quoting order shows at the right price +(calculation of this price is left as an exercise for the user). Cancel the synthetic order. + +4. Make the hedging ratio 6.0 and enter a synthetic order of 1 lot at -0.30. You should see an +active spreader order, but since there is not enough qty in the hedging market, +no quoting order should be sent. Keep this synthetic order running. + +5. Change hedging leg’s 1 lot ask @ 18.30 to a 2 lot. This should enable the hedging qty requirements +to be met, and a quoting order should be sent at 18.620. Keep this synthetic order running. + +6. Changing the 2 lot @ 18.30 back to 1, and once again the hedging qty requirements are not met hence +the quoter order should be cancelled. Cancel the synthetic order. diff --git a/testing/manual/spreader/post_hedge_ticks_away_cross.txt b/testing/manual/spreader/post_hedge_ticks_away_cross.txt new file mode 100644 index 000000000..378657fce --- /dev/null +++ b/testing/manual/spreader/post_hedge_ticks_away_cross.txt @@ -0,0 +1,16 @@ +This test assumes the user has done the test in simple_sanity.txt + +0. Follow the instructions in common_setup_2.txt + +1. Now we are going to force a legged hedge, ie a hedge that does not get filled. +The way to do this is to drag the quoting order to force a cross, which will in turn send a hedge +that joins the market instead of crossing it. So drag the quoting order all the way to the bid side +to cross it with 5 @ 18.50. This should cause a fill in the quoting leg at 18.50 and a hedge order +will be sent at 18.20. Verify this. This hedge order will keep working there (since we don't have +any post hedging rules right now). Now cancel the spreader order. + +2. Enable the Post-Hedge Ticks Away Cross for the hedging leg. Put 25 for Ticks and 3 for the Cross Ticks. Repeat 4. +Now move the opposite inside market of the hedger (which is the ask order at 18.30) gradually away from the +hedging order to finally being 26 ticks away. The spreader moves the hedger order 3 ticks into the opposite +inside market and cause a fill. The spreader order will be filled too. Verify that the order was indeed sent +3 ticks into the opposite inside market diff --git a/testing/manual/spreader/post_hedge_time_based_cross.txt b/testing/manual/spreader/post_hedge_time_based_cross.txt new file mode 100644 index 000000000..565bd6a47 --- /dev/null +++ b/testing/manual/spreader/post_hedge_time_based_cross.txt @@ -0,0 +1,16 @@ +This test assumes the user has done the test in simple_sanity.txt + +0. Follow the instructions in common_setup_2.txt + +1. Now we are going to force a legged hedge, ie a hedge that does not get filled. +The way to do this is to drag the quoting order to force a cross, which will in turn send a hedge +that joins the market instead of crossing it. So drag the quoting order all the way to the bid side +to cross it with 5 @ 18.50. This should cause a fill in the quoting leg at 18.50 and a hedge order +will be sent at 18.20. Verify this. This hedge order will keep working there (since we don't have +any post hedging rules right now). Now cancel the spreader order. + +2. Enable the Post-Hedge Time Away Cross for the hedging leg. Put 10,000 for Time(ms) +and 5 for the Cross Ticks. Repeat 4 and wait 10 seconds. This time the hedge order should +not wait forever, but after 10 seconds, it should cross the opposite inside market by 5 ticks. +The spreader order will be filled too. Verify that the order was indeed sent 5 ticks into +the opposite inside market diff --git a/testing/manual/spreader/pre_hedge_pay_less.txt b/testing/manual/spreader/pre_hedge_pay_less.txt new file mode 100644 index 000000000..df0c31e8a --- /dev/null +++ b/testing/manual/spreader/pre_hedge_pay_less.txt @@ -0,0 +1,15 @@ +This test assumes the user has done the test in simple_sanity.txt + +0. Follow the instructions in common_setup_2.txt + +1. Send a buy order at -0.20. Since we are crossing the synthetic market’s bid-offer spread, +the order should get filled immediately. Verify that and that the quote and hedge prices are correct. + +2. We will now test for Pay Less. This means the hedger order will be entered at an +advantageous price (ie buy lower, sell higher) if the quantity at the hedge price level is greater +than a threshold. In order to do this we will enable Pay Less for the hedging leg, enter a threshold of 1, +select the drop down to Size (ie absolute size vs a ratio) and set Payless ticks to be 15 ticks. + +3. Send a buy order at -0.20. Verify that the hedger order is sent 15 ticks away from the hedging price +(since it is a buy order, it should be 15 ticks lower than the hedging price level). +This will result in the hedging order being worked on the bid side. Cancel the spreader order. diff --git a/testing/manual/spreader/pre_hedge_payup.txt b/testing/manual/spreader/pre_hedge_payup.txt new file mode 100644 index 000000000..0f0120a56 --- /dev/null +++ b/testing/manual/spreader/pre_hedge_payup.txt @@ -0,0 +1,14 @@ +This test assumes the user has done the test in simple_sanity.txt + +0. Follow the instructions in common_setup_2.txt + +1. Send a buy order at -0.20. Since we are crossing the synthetic market’s bid-offer spread, +the order should get filled immediately. Verify that and that the quote and hedge prices are correct. + +2. We will now test for Pay Up. This means the hedger order will be entered at a +worse price (ie buy higher, sell lower) if the quantity at the hedge price level is less than a threshold. +In order to do this we will enable Pay Up for the hedging leg, enter a threshold of 100, select +the drop down to Size (ie absolute size vs a ratio) and set Payup ticks to be 5 ticks. + +3. Send a buy order at -0.20. Verify that the hedger order is sent 5 ticks away from the hedging price +(since it is a buy order, it should be 5 ticks higher than the hedging price level). Cancel the spreader order. diff --git a/testing/manual/spreader/quoting_throttle.txt b/testing/manual/spreader/quoting_throttle.txt new file mode 100644 index 000000000..a6984bd83 --- /dev/null +++ b/testing/manual/spreader/quoting_throttle.txt @@ -0,0 +1,18 @@ +This test assumes the user has done the test in simple_sanity.txt + +0. Follow the instructions in common_setup_2.txt + + +1. Enter a 1 lot spreader buy at -0.30. Verify the quoting order shows up at the right price. + +2. The quoting order is using the hedging leg’s sell side to price (ie the 5 lot order at 18.30, lets call it S1). +So moving S1 should move the quoting order. Since the throttles are turned off, everytime we move S1, the quoting +order should move too. Move S1 a few times and verify that the quoting order moves to the correct price. +Cancel this synthetic order + +3. Modify the synthetics throttle behaviour. For the quoting leg, enable the Throttle and set Inside Ticks to 1 +and Outside Ticks to 3. What this means is that quoting orders moving toward the inside markets, have to move +beyond 1 tick for them to be sent out; and quoting orders moving away from the inside market have to move beyond +3 ticks for them to be sent out. Verify this behaviour by making suitable modifications to S1. + +4. Make adjustments to the spreader price (ie move it from -0.30) and verify the throttling behaviour is correct. diff --git a/testing/manual/spreader/simple_sanity.txt b/testing/manual/spreader/simple_sanity.txt new file mode 100644 index 000000000..8ad1caa91 --- /dev/null +++ b/testing/manual/spreader/simple_sanity.txt @@ -0,0 +1,13 @@ +This test makes sure the basic spreader functionality works for 2 legged synthetic spreads with one quoting leg + +0. Follow the instructions from common_setup_1.txt + +1. Enter a synthetic order of 1 lot at -0.30. Verify that a quoting order of 18.60 shows up in the second leg. +Cancel the synthetic order and the quoting order should be cancelled too. + +2. Enter a synthetic order of 1 lot at -0.30, again. Now drag the the synthetic order down the ladder +(ie lower bid prices) to a few random prices of your choice. Verify that the quoter leg price is adjusted +accordingly and is correct. + +3. Now cross the synthetic order by dragging it all the way to -0.20 (there should be a 1 lot at that price). +Verify that the synthetic order gets filled at -0.20, the quoter order at 18.50, and the hedger order at 18.30.