Modifying tests according to the limit changes
This commit is contained in:
1 parent
82535c915a
commit
0ff2fbc4ff
3 files changed
+20
-10
No files matched your search
@@ -27,6 +27,11 @@ _sod_time(sod_time){
|
||||
// returns the timeval for today's hh,mm,ss (in local machine terms)
|
||||
// (timeval is the microseconds from epoch)
|
||||
timeval SODPosition::to_timeval(uint16_t hh, uint16_t mm, uint16_t ss) {
|
||||
// function does the conversion the following way:
|
||||
// 1. gets the now secs from epoch using time
|
||||
// 2. converts it into local time (so we have now local time)
|
||||
// 3. overrides the hh, mm, ss passed
|
||||
// 4. converts it back into secs from epoch using mktime
|
||||
bts_assert(hh < 24);
|
||||
bts_assert(mm < 60);
|
||||
bts_assert(ss < 60);
|
||||
|
||||
@@ -1,6 +1,4 @@
|
||||
This test verifies that product position limits are enforced correctly. (Position limits are
|
||||
enforced at both the security and account level)
|
||||
|
||||
This test verifies that product position limits are enforced correctly.
|
||||
Use SIM for all steps of the test
|
||||
|
||||
0. Clear up your orders, fills and admin db so we don't have any lingering positions
|
||||
@@ -17,11 +15,16 @@ and enter a big clip, say 500000, so that clip limits don't interfere with this
|
||||
|
||||
5. Enter a rule for SIM, Future, SI, 60, 120.
|
||||
|
||||
6. Send 3 10 lot buys for both the futures. Make sure they go through.
|
||||
6. Send 3 20 lot buys for both the futures. Make sure they go through.
|
||||
|
||||
7. Send a 1 lot on SIU8. The limit of 60 should not allow it. Make sure the rejection
|
||||
message is clear.
|
||||
|
||||
8. Cross 2 of the 20 lots enterred in 6 so that they fill.
|
||||
|
||||
9. Send a 1 lot on SIU8. The limit of 60 should not allow it. Make sure the rejection
|
||||
message is clear.
|
||||
|
||||
8. Change the max to 70, and try a 10 lot again. This order should be allowed.
|
||||
Try another 10 lot and it should be stopped.
|
||||
|
||||
|
||||
@@ -4,17 +4,19 @@ ii. spread legs fills (and working orders) are applied toward enforcing
|
||||
the position limits for the legs
|
||||
iii. leg limits are checked when entering spread orders
|
||||
|
||||
i:
|
||||
|
||||
1. Pick a 2 legged spread (lets say SIU8-SIZ8). Set the clip limits high for both spreads and futures
|
||||
so that they don't interfere.
|
||||
|
||||
2. For the Position Limits, set Max Long and Max Short of 100 and 110
|
||||
for the SI futures and 20 and 30 for the SI spreads respectively.
|
||||
|
||||
3. Verify that the limits set in 2 work for futures(remember working orders count toward limit enforcement so you dont need
|
||||
fills). Cancel all the orders.
|
||||
3. Make sure "Ignore Spread Position Limits" is not checked
|
||||
|
||||
4. Verify that the limits set in 2. work for spreads. Cancel all the orders.
|
||||
4. Verify that the limits set in 2 work for futures. Accrue future "positions" through a
|
||||
combination of working orders and fills. Cancel all the orders.
|
||||
|
||||
5. Make these position limits 1,000,000 to make them irrelevant
|
||||
5. Verify that the limits set in 2. work for spreads. Cancel all the orders.
|
||||
|
||||
6. Check "gnore Spread Position Limits" and make sure this disables spread limits.
|
||||
|
||||
7. Make these position limits 1,000,000 to make them irrelevant
|
||||
Reference in new issue
Block a user