49 lines
1.4 KiB
Plaintext
49 lines
1.4 KiB
Plaintext
Message Governor
|
|
|
|
The purpose of this test is to verify that we can limit our message
|
|
rate when sending messages to the exchanges.
|
|
|
|
1) Setup configuration so that the limits are human reachable. Use
|
|
the following configuration for jetfix:
|
|
|
|
|
|
|
|
JetFIX {
|
|
value {
|
|
connection {
|
|
# Exchange simulator connection
|
|
name: "sim"
|
|
platform: SIM
|
|
socket_connect_host_ip: "127.0.0.1"
|
|
socket_connect_port: @Ports.exchange_sim_fix_port
|
|
sender_compid: "SPARK" # this is the FIX session name
|
|
sender_subid: "BTS"
|
|
target_compid: "BTS"
|
|
target_subid: "BTS"
|
|
end_time: "07:48:00"
|
|
start_time: "07:52:00"
|
|
raw_data: "1JE9X"
|
|
use_cme_secure_logon: false
|
|
seconds_to_pause : 1
|
|
|
|
# max of 3 order operations (creates or updates only) for each 5 second
|
|
max_order_msgs_per_window: 3
|
|
window_duration_msecs: 5000
|
|
}
|
|
}
|
|
}
|
|
|
|
2) Start the system and try to enter more then 3 orders in five 5
|
|
seconds. You should be stopped at order 4, with a msg stating the
|
|
messaging rate limit was breached.
|
|
|
|
3) Wait 5 seconds and try again, you should be able to enter new orders
|
|
|
|
4) Try again, but this time use a single order and try to change it
|
|
more than 3 times in 5 seconds. Similarly the 4th change should fail
|
|
with appropriate messages being shown in the ladder, activity log and
|
|
order book.
|
|
|
|
5) Wait a bit, and try to change the order again, it should work.
|
|
|